The electrical installation in a home or business is a complex system that is designed to both distribute the power and the load that is applied to it. Otherwise, the wires would become overloaded and this could result in melted equipment, outlets or damaged wiring. The typical circuit begins with a breaker switch. This breaker is load limited. That is, the breaker will be rated to carry a certain amount of amperage. If the devices connected to the breaker draw too much power, then the switch will trip and the circuit is broken. The best Electric repair in Indianapolis for dealing with this situation is the installation of another circuit so the load is split.
One of the more interesting aspects of electrical wiring is the way they age. Some installations can run for decades with few problems while others develop issues in the first decade. This can happen for many reasons, but one of the most common is the tendency to place too many items on a circuit. In the early days when fuses were popular, people had a tendency to stick a penny behind the fuse. This completely eliminated the function it performed and created a serious hazard. It also created the need for a better solution and this resulted in circuit breakers and more effective electrical codes.
Unfortunately, some people still try to cheat by replacing a constantly tripping breaker with one that has a higher rating. This is a bad situation because it could result in too much load on a wire that was not rated to carry it. Low-cost wiring solutions are tempting, but they are also dangerous. An expert in Electric repair in Indianapolis can resolve the situation by adding another circuit and any wires, outlets and switches that may be required.
If the home or property owner is unsure of the quality of the wiring, then it may be time to think about an inspection. Visually inspecting the system and testing the circuit for continuity, impedance and resistance can help to determine where problems may exist. A thorough inspection could save a lot of money in the long run because aging wires can affect the equipment connected to them. To learn more, visit the website at BurtnerElectric.com.
Be the first to like.